广州精密仪器网-专业精密仪器网站.生产轮廓仪,粗糙度仪,圆柱度仪,圆度仪,手持式三维激光扫描仪,便携式三坐标测量臂,三坐标测量机,万能试验机,拉力试验机,维氏硬度计,影像测量仪,金相显微镜等精密仪器
 位置: 首页 > 行业方案 > 正文
超级亚久里F1车队和FARO铂金测量臂 - 成功测量的完美方案

超级亚久里F1车队和FARO - 成功测量的完美方案


超级亚久里F1TEAM是最新增加的刺激和快速移动的汽车运动赛事。

该小组成立于2005年底雇用了其在英国的技术中心在里菲尔德在威特尼/牛津郡的总部的约100名员工。超级亚久里在2006年1月购买的,目前它的主要用途是测量车身零件和一个8英尺适合白金FaroArm和它也可以用来进行合法性检查,车前一级方程式比赛。

此外,还利用FaroArm测量臂扭转为司机的座位区,使任何必要的修改,进行了车工程师的介绍。

白金FaroArm测量臂的准确性使上述检查要进行在完成车通常是非常困难和耗时在使用传统三坐标测量机设备做运动。 FaroArm测量臂本身的内部平衡的“中性浮力”和疲劳免费使用。事实上,过载传感器防止强调手臂,并帮助确保用户的精确测量,使“与感觉的FaroArm测量臂只臂可用于任何地方进行检查,进行逆向工程或执行与以前闻所未闻的路线和CAD部分检查准确性。

该FaroArm测量臂硬件是不仅与法如凸轮2测量软件,而且还与一个第三方软件供应商的广泛而增加了灵活性,可以提供接口的FaroArm测量臂的能力。



目前超级亚久里正在运行的FaroArm测量臂MCOSMOS三丰-3检测软件。检查经理Tim诺兰引号“我们现有的三丰接口软件与FaroArm测量臂,使工作人员进行检查和扭转,而无需额外的软件工程师培训需要的组件,从而节省成本。”

Tim还补充说:“自从手臂,检查和验证模式的推出时间和车身相比,大大减少了进行固定床三坐标测量机上相同的运动。

Super Aguri F1 team and FARO – The perfect formula for success

The SUPER AGURI F1TEAM are the latest addition to the exciting and fast moving sport of Motor Racing.

The Team was formed at the end of 2005 and employs around 100 staff at its UK Headquarters at the Leafield Technical Centre in Witney /Oxfordshire. Super Aguri purchased an 8ft Platinum FaroArm in January 2006 and at present its primary use is to measure bodywork parts and fits and it is also used to carry out car legality checks prior to a Formula 1 race.

Additionally, the FaroArm is also utilized to reverse engineer profiles for the driver´s seat area to enable any necessary changes to be carried out on the car.

The accuracy of the Platinum FaroArm enables the above checks to be carried out on the completed car which would usually be very difficult and time consuming when using Traditional CMM equipment. The FaroArm itself is internally counterbalanced for “neutral buoyancy” and fatigue-free usage. In fact, overload sensors prevent users from stressing the arm and help ensure precise measurement, making it “the only arm with feeling The FaroArm can be used anywhere to inspect, to reverse engineer or to perform alignments and CAD to part inspection with previously unheard of accuracy.

The FaroArm hardware is capable of interfacing not only with FARO CAM 2 Measure software, but also with a wide range of 3rd Party software suppliers which adds to the flexibility that the FaroArm can offer.

SUPER AGURI F1 TEAM

At present Super Aguri are running Mitutoyo MCOSMOS -3 inspection software on the FaroArm. Inspection Manager Tim Nolan quotes ” interfacing our existing Mitutoyo software with the FaroArm has enabled staff to inspect and reverse engineer components without the need for additional software training, thus saving costs”.

Tim also added “Since the introduction of the arm, inspection and verification time of patterns and bodywork has been greatly reduced compared to carrying out the same exercise on a fixed bed CMM.

相关产品
产品展示
快乐赛车 云购彩票 永盛彩票 优优彩票 正好彩票 快乐时时彩 快乐赛车 优优彩票 极速赛车 优彩彩票